Kamera Keamanan Luar Ruangan Nirkabel 4K Ultra HD dengan Baterai, Sertifikasi ROHS, ODM&OEM

Deskripsi Produk

1: 4MP video pixels 1/2.8-inch CMOS

2: Full HD 2560*1440 resolution;

3: HD lens 3.83mm fixed;

4: IR-CUT automatic switching to achieve day and night monitoring;

5: 6pcs 850mm IR LEDs and 3pcs white lights, IR distance: 8-10M;

6: Support digital WDR and 3D noise reduction functions;

7: H.265 video compression technology, high image quality, low bit rate;

8: Support mobile phone remote monitoring (iOS, Android);

9: Supporting cloud services and third-party value-added services, optional (Alexa, Google);

10: Built-in non-removable rechargeable 5200mAh/3.7V battery,support camera working 2-3 months and can customize 6700mAh battery;

11: High precision PIR body movement detection alarm, filter false positives, adjustable sensitivity (3~9 m);

12: IP65 protection level to meet the requirements of indoor and outdoor scenarios;

13: With one 1.5W solar panel,optional 3W/5W solar panel;

14: Support 4G or WIFI one of two and support customize key monitoring area;

15: Support motion detection、sound detection、human body detection and so on;

Parameter produk

Gambar rincian

FAQ

Q:256G SD/TF card, in the case of 24 hours of continuous work, how many days will be full of record?

A:According to the current calculation, the device video is the main stream (web real-time preview is the substream),8G memory card can be recorded for about 18 hours,16G can be recorded for 36 hours, and so on, 256G can be recorded for about 24 days uninterrupted

Q:The device recording or real-time video time watermark error?

A:1.In the mobile APP, set the local time zone, "My" → "Profile" → "Time Zone"

2:In the lower right corner of the main screen of the mobile APP. If the device is not connected to the network and the correction is not accurate, remove the device and reconnect to the APP to confirm whether the time zone is normal

Q:Why is the camera not connected to the WIFI network?

A:1.Check whether the camera is 2.4G or dual-band (2.4G+5G) or WIFI6

2.The device is far away from the router resulting in unstable networking

3.The WIFI signal value is low and the networking is unstable, resulting in no Internet connection. You can check whether the signal is abnormal in the background

4.The router is unstable, no IP address is allocated, or the IP address is occupied. Check whether the device has obtained an IP address

5.Whether you input the correct WIFI password

Q:Why can't the camera connect to 4G network?

A:1.4G card traffic has been used up can not connect to the 4G network, please recharge the 4G traffic

2.4G module does not support the customer SIM card operator frequency band, you can replace another operator 4G card and try

3.4G signal poor (can be compared to the 4G signal of the mobile phone),4G network card equipment frequently dropped out of the line

4.SIM card is not activated, resulting in no network

Q:The video memory card cannot be recognized?

A:1.The file format of the memory card is incorrect, if it cannot be formatted into FAT32 on the camera, you can format it on the computer

2. At present, the memory card /4G card does not support hot swap, so as to avoid the identification of the memory card due to hot swap 3. The memory card is damaged. Try replacing the memory card

Q:The memory card recognizes but does not record or the recording is incomplete?

A:1.The file format of the memory card is incorrect, if it cannot be formatted into FAT32 on the camera, you can format it on the computer

2.You are advised to select a TF/SD card with a read/write rate higher than Class10. Otherwise, recording loss or stalling may occur.

3.The recording mode is not selected correctly. You can record continuous or event video.

4.If the device is powered off or disconnected during the recording process, check the background logs to see whether the device is powered off